Delux Printing Machinery Co., Ltd.
Guangdong Shunde Delux Printing Machinery Co.,Ltd.
HIGH SPEED Computerized Quality Inspection Rewinder
HIGH SPEED Computerized Quality Inspection Rewinder
High Speed Automatic Quality Inspection Rewinder Model: DLFJY-1250   Features: Mainly suitable for the inspection of film after printing;  the product is made of an imported & advanced printing quality inspection system.    This system is mainly to inspect the flaws of film, paper, aluminum foil and other rolling materials.  And save the flaw position by alarming, labeling, printing, computer recording, etc,  in this case to remind the operator of the flaws.   This system is to make 100% detection for the rolling materials without any omission.  Due to the fact that it uses a high precision 3CCD linear array sensor and the uptodate Digital Picture Processing Technique, in order to make sure all flaws are checked out, it keeps on the same speed on the inspection and production, which makes no influence for the production.   Tension is driven by 3 servo motors and controlled by PLC (made by Mitsubishi, Japan) for stable tension of any random rollover. It is also equipped with a cutting platform to cut off the unqualified parts.   If unwinding is less than Φ150mm, it will automatically alarm, and the machine will stop on the position of the detected flaw according to the computer records, and cut off the defects.   The rewinding is in good condition which saves the cost and provide a good condition for the next process.   Technical Parameters: Max. Material Width : 1200 mm Max. Inspection Width : 1050mm Max. Rewinding Diameter : Φ 600mm Max. Unwinding Diameter : Φ 800mm Inspection Speed :  150-300m (3 seconds return to standby mode) Deviation Value : ≤ ± 0.3 mm Machine Power : 14KW Machine Size : 2200x2000x1800mm   Suitable Material : - Suitable for those BOPP, PE, PET, PVC and other films and paper.
DLFJY-1250
Time:2020-7-11
2 in 1 Rotogravure Printing & Coating Machine
2 in 1 Rotogravure Printing & Coating Machine
High Speed Automatic Rotogravure Printing & Coating Machine Model : DLY-513000T Main Features: ● This machine is suitable for two-color printing (coated) and one-plus-one (coated) of roll material. ● Production process: single-stage unwinding → corona → the first color is (anti) printing (coating) → drying → the second color is printing (coating) → long drying tunnel drying → air cooling → humidification → water Cooling → traction → single-station winding and other processes to complete a one-time, to ensure efficient and stable production, but also to achieve the effect of reducing material loss. ● The machine uses Tension Control System from Mitsubishi of Japan. ● Traction press roller, printing press roller, coating pressure roller pressure through the pneumatic components to achieve control. ● The use of three-dimensional adjustable pneumatic back pressure scraper, the pressure can be adjusted, and through the scraper reciprocating swing and version of the blowing mechanism to effectively eliminate the printing knife. ● The use of nozzle-type hot air and far-infrared ceramic heater cycle fast exhaust arc-type sealed double-layer structure of the oven and a coating is an independent oven, pneumatic top open oven, positive and negative printing once completed drying, and can achieve secondary heat Using up to 50%, reducing energy consumption. ● District temperature digital display, and to achieve precise automatic control. ● Machine parameters through the touch screen man-machine interface settings, through the PLC on the inverter and motor control, in order to achieve the host speed, tension and other automatic control and monitor the machine working state. ● With the use of machine, electricity, gas integration design, so the machine has a complete security protection, intelligent identification of the machine work and determine the fault. ● The whole machine printing, coating, oven and other active synchronization mechanism, and to achieve automatic synchronization control. ● to achieve the whole computer automatic control. ● Tensile tension using non-linear taper tension control to ensure that the winding coil material without grasping the phenomenon of deformation, and through the photoelectric automatic correction system to ensure that the winding material surface neat. ● The new type lock-up achieves high efficience, and well prevent the problem caused by mechanical lock-up structure for color-registering. ● Toluene concentration alarm. ● PLC control, touch screen centralized control; ● Optional Heating Method : electric, air energy, natural gas, bio-energy, heat transfer oil, steam, etc. Technical Parameters: ● Max. Printing Width : 60-1600mm ● Coating Capacity : 0.5 ~ 1.5g /m2 ● Max.Mechanical Speed: 150m/min ● Printing & Coating Speed: 60-150m/min ● Platen Diameter: Φ 120 mm ~ Φ 270mm ● Max. Platen Width : 1700mm ● Unwinding & Rewinding Diameter: Max. Φ1000 mm ● Paper Core of Unwinding & Rewinding : 3" ● Max.Temperature of Drying Box : 230 ℃ ● Drying Tunnel Length: 24 meters (available for customerized required length) Suitable Materials:  ● Suitable to those thin film, Electrochemical aluminium film, paper,etc.
DLY-513000T
Time:2020-7-11
Previous page
1
2
3
4
5

Friendship:

Delux Printing Machinery Co., Ltd.

Delux Promotional Website

Made-in-China.com

Delux Printing Machinery Co., Ltd.

Delux Diesel Engine Co., Ltd.

Delux® Copyright © 2020 Delux Printing Machinery Co., Ltd.